The MGF Register Forums

Fuel pump s available for both MGF mems 1.9 and MGF/TF mems 3. Scuttle panel complete with all scuttle caps and screws. MGTF Clock and oil temp gauge I also have a wiring adapter to allow you to fit these to an earlier MGF. See previous pages for more items, I have been through them indicating any ...

SOLD, Going to a very nice man and on to his MGF.

Stick with the standard height, may not look as good but the ride and handling are so much better. If you want the lower look then fit lowering pins.

Unfortunately with MG/Rover nothing is ever just simple, following a logical order. My MGF, an MY2000, 1.8Mpi, VIN No., ending YD515507, produced in the year 2000 is fitted with MEMS 1.9 (It is in all other respects a Mk2 / MY2000) According to Dieter's website ( http://www.mgfcar.de/vin/emgf_vin.ht...

Full set of HT leads, distributor rotor arm and cap. All fully working and were only changed a few hundred miles ago.

Good set of carpets, will post photos tomorrow.

Here is a How To I did to cure a sloppy gear change ... and shorten the gear lever too, click on the link below

http://www.the-t-bar.com/forum/54-how-t ... gear-lever

Rear Speaker bar, perfect working order. http://www.the-t-bar.com/forum/attachment/18676 Exhaust heat shield , quite often 'mechanics' somehow forget to refit them. http://www.the-t-bar.com/forum/attachment/18677 Engine bay bracing bars and mounting bracket from a TF, a fantastic addition to any MG...

Should be the same, cannot see any reason why it would be different. Is you F airbox any different to RHD air box?

New items added at the foot of page 2, check back if you haven't already. **** Click on photos to see enlarged version **** 20151029_111308.jpg MGF Boot Hi level brake light, perfect working order and very good condition, surround can also be supplied if required. 20151029_112237.jpg The finishing t...

MGF Headlights , as seen inserts have been painted Tahiti blue. Rear lights These were from the TF 160 but will fit MGF, very good condition SOLD 20151029_104144.jpg Tahiti blue doors, bonnet, wings, front and rear bumpers Centre console 20151029_115442.jpg MGF Mk2 / TF Steering wheel, very good co...

Take a look at this tread I started which has reviews and comparisons of some of the SS exhausts available.

Click Here

The Toyosport featured is currently for sale, see my thread F / TF Parts for sale (many new items added) Click here to see for sale thread

Blue hood with clear rear screen , good condition. 16 wheels.jpg Great time to get this and colour treat it before fitting as it can be a messy job. Toyosport Stainless Steel Exhaust SOLD http://www.the-t-bar.com/forum/attachment/4078 http://www.the-t-bar.com/forum/attachment/4082 20151029_092257.j...

All for sale except the ones in the boot vents which are sold.

Click on the link to see the Stainless Steel mesh work I did http://www.the-t-bar.com/forum/9-mgf-tf ... esh#163056

I just logged in to remove the 52mm Throttle body, it is sold. The K&N is currently available but I have just had a pm from a member over on the T-Bar.com wanting to purchase it. I will let you know if it doesn't go ahead.

I found the 195's on the front felt fantastic and the Falkens are a great choice. Theoretically (Rob this is where you correct my logic, I won't be offended if you do :D ), so theoretically, with 215 on the back and 195 on the front if you do reach the limit of grip you have understeer, which is eas...

This may soon be going on a none MG car, which does seam like a shame. No one want that finishing touch for their F ?

If anyone is after a set of 11 spoke 16" alloys fitted with a new (almost) full set of Falken 914 then take a look at my other thread viewtopic.php?f=9&t=20788#p162494

I am selling the 11 spoke alloys fitted with the almost new tyres as a set.

Seats now sold.

In answer to your question, yes seats from TF or Mk2 will fit a MK1 and are much more comfortable.